Sliding Patio Doors Repair

Patio doors that slide open are an excellent way to take advantage of your outdoor space, but they can become difficult to open and close. This can be due to a variety of issues, including dirty tracks or improperly aligned rollers.

Clean the track and Lubricating the rollers. You can also utilize the adjustment holes on the bottom of the panel to re-align your rollers.

Dirty or Damaged Track

A dirty or damaged track can cause the door to not slide smoothly. Over time, dirt, grit, and even rust can build up, preventing the track to move smoothly. The solution is to clean the track thoroughly using a brush and mild detergent. This task should be performed regularly to ensure smooth operation and avoid costly repairs in the future.

A leaky door can be a common issue. It requires immediate attention in order to prevent structural deterioration, water damage and mold growth. The issue is usually caused by worn weather strips and misaligned door. This can be corrected by replacing the old weather stripping tilt and slide patio door repairs near me aligning the doors.

Rollers that veer off the track are another common issue that can be solved with a few minutes of DIY work. This can be a difficult task so you may need a helper to help you. Sit inside the house and then lean a panel towards you to reposition the rollers. To prevent the panel from falling, set it on sawhorses once it's been lifted off the bottom track. Then loosen the screws that keep each roller in place, and take them off with a screwdriver. Then, you can clean any dirt stuck between the tracks and the wheel. Then, clean each wheel using denatured alcohol as well as an rag, and then reposition the wheels and reconnect them to their tracks.

It's possible to straighten bent sections of track with a rubber mallet, and a piece of wood. If the bent section is close to hinges or is likely to cause further damage, it's best to contact a professional.

Misaligned Rollers

If your sliding door is having a problem sliding, it's likely that the rollers have been misaligned. The wheels could be dirty or rusted, and their bearings wear down. This friction causes the door to become snagged and grind when it is opened or closed. It also makes noises that sound like squeaking.

Fortunately it's an easy fix. You don't need to remove the door to access the wheels since they are mounted on a bracket which is adjustable. Use a screwdriver to find the adjustment holes on the frame (usually either side). Turn the screws to turn the wheels. A clockwise rotation of the screw raises the wheel, while a counterclockwise movement lowers it. Continue to adjust until the door is moving effortlessly and quietly when it is opened or closed.

It is essential to adjust the wheels prior adjusting the latch. For the lock to function properly, the latch hooks must be aligned with the strike plate. If you don't, the latch could open or close while you're not in the room.

Sliding patio doors are an investment, and making sure they are operating properly can keep your family safe and secure. You can avoid future expensive repairs by fixing common issues like faulty tracks, rollers and handles. If you need help with your patio doors, call our team. We will assess your sliding patio door repair needs and assist you in keeping it in good condition. Our experts can also assist with any replacement parts you may need.

The door frame is loose or damaged

Sliding patios doors are a great option for any home. They are a practical and attractive alternative to swing-open or hinged doors for patios. Like any other hardware that they are, they could face many issues in time. Many of these issues can be fixed with a bit of DIY expertise.

A gap in the frame is a frequent issue with sliding patio doors. It can be caused by many factors, including tracks or rollers that are not aligned properly as well as a damaged or damaged door track or a bent frame. In the majority of instances, the issue can be fixed by removing the doors and attaching the track. This should be done with caution to avoid harm the track or frame.

In some cases it is necessary to replace the entire track, which can be easily accomplished using a universal replacement kit that is readily available at major hardware stores. These kits are simple to install and will have your door functioning properly again in no-time.

It is crucial to check your sliding door frame and hardware for signs of wear and tear, such as loose screws or bolts. This is a straightforward and efficient DIY patio maintenance step that is done using a screwdriver. It is also essential to lubricate the tracks and rollers of your patio door to ensure smooth operation and to avoid premature wear.

For many homeowners the patio doors are the primary entrance to their backyard and outdoor living space. In order to maintain security and comfort in the home, it is crucial that they work correctly. By taking the time to follow these easy maintenance tips homeowners can extend the lifespan of their sliding patio doors and reduce costly repairs or replacements.

A faulty handle

The sliding patio doors are ideal for allowing you to get into your home and get access to your backyard, but they can be difficult to operate when they are misaligned. A defective handle can cause the door to not shut or open properly. The good part is that repairing the handle that is loose is a simple task that can be accomplished at home.

In many cases, a loose grip is the result of screws that have fallen out of the backplate. To fix the problem tighten the screws that are on the inside of the handle with a screwdriver. If the handle is loose it could indicate that the threads have worn away and require replacement.

A damaged latch could be the cause. It is more likely to happen if the latch is made of plastic, rather than metal. If the latch is not catching or turning it, try oiling it first to see if it aids. If this does not work, you may have to replace the lock.

Finally, the handle itself can become difficult to operate if it is broken or damaged. If this is the case it is necessary to replace it with a new handle that matches the style of your sliding patio door.

Whether your patio doors are old and outdated or brand new, Feldco can help you get them back on track. We have a variety of high-quality patio doors in different sizes and styles. For more information about our doors, contact us today! We are proud to serve homeowners throughout Southern California, including Ventura County, Orange County & San Diego County.

Poor weatherstripping

It's time to upgrade your weather stripping if see light around closed windows and doors, or notice a draft pushing at the window or door. The strips form an airtight seal that stops unwanted water, air, and pests from entering your home. This helps keep your conditioned and heated air inside, saving money on energy bills.

Depending on the age of your weather stripping it may have deflated, and lost its buoyant positive seal. It is easy to identify this by putting a dollar bill under the seal on the top and bottom of the jamb as well as the door frame where they meet. If the dollar bill slides between the seal and door easily it is time to replace the weatherstripping.

It's tempting to remove only the worn portion of weather stripping and then replace it, but this could result in cracks on the sides of the new piece and could cause problems with the seal in the future. It is much more effective to replace all of the stripping. This will allow you to be assured that your door will be sealed properly.

Follow our DIY guide to weather stripping to install the correct material on your sliding patio door, and frame to ensure a secure, lasting seal. It's a great method to fix your door and reduce your energy bills, so don't put off the project until it's too late. You'll be able to save money and improve the appearance of your home.