Sliding Patio Doors Repairs

Your sliding glass patio doors to let in more light and increase your home's energy efficiency. In time, they might begin to show signs that require some maintenance.

Luckily, the majority of problems with sliding patio doors are simple to address. Learn more about how to keep your patio door lock repairs near me doors looking and working like new:.

Dirty or damaged tracks

The tracks of your sliding patio door may be filthy or clogged. Over time, the dirt and grime from everyday use can accumulate on the track. This can cause the door jam or even break completely.

The buildup can be slowed by incorporating regular light cleaning of sliding doors and tracks during your regular chores. Start by cleaning large debris off the tracks. Then, use warm water and non-abrasive cleansing products like dish soap to clean them. Add a little vinegar to your cleaning solution can help in removing stubborn grease and dirt stains.

If your sliding door still won't move smoothly after following these steps, it may be a sign of more serious damage and requires a professional repair or replacement. There are a few basic fixes you can do before calling a professional to avoid costly repairs or replacements.

Place a doormat under your sliding doors. This will help keep dirt out of the tracks. Regularly trim any plants or bushes that are in close proximity to your sliding door to reduce the amount of debris that gets tracked into the tracks. Close the door correctly to avoid damaging the rollers and wheels. You can extend the life of your doors by keeping them clean and well-lubricated.

Rollers that are not aligned

Occasionally it happens that a sliding patio door becomes unbalanced or becomes stuck. This is usually due to dirt, or other obstructions that can be easily removed. Sometimes it's due to a bent roller or track. In the latter scenario, you may be able to straighten the roller by removing them with their adjustment screws and then cleaning them using ruby alcohol. These parts can be fragile.

If your doors are still stuck, you can try applying lubrication to the rollers to decrease friction and allow them to slide. Choose a silicone-based lubricant, since petroleum-based lubricants tend to draw dirt more quickly. It is also essential to clean the tracks and rollers prior to applying lubricant.

After you've cleaned the rollers, you can put them back in place them using their adjustment screws. It is also a good idea to apply the same lubricant that you used when cleaning them. Make sure to push the rollers completely in their channels when reinstalling them. Then, you can test your door to see if it now slides smoothly.

If the problem continues it could be necessary to take down your door and inspect the tracks and rollers for more significant problems. If the tracks or rollers are bent badly, they may need to be replaced. It is best to engage a professional to install the rollers or tracks in this situation.

Warped Glass

Sliding glass door are great to bring the outdoors into a room and letting in natural sunlight but they could also be prone to damage that needs repair or replacement. Some of the most frequent issues that can occur are cracking, warping and fading. The materials that make up the sliding glass patio doors start to deteriorate when exposed to heat, sunlight and other environmental elements. Cracks are often caused by injuries caused by impact, like from a lawn mower or ball run-in, while fading usually happens due to repeated contact with sunlight or other elements found in nature.

If your sliding patio door repairs doors aren't easy to open or close, it could be an indication that their rollers and tracks aren't functioning properly. This issue could be caused by accumulation of dirt, rust or debris in the track, or misaligned wheels or an absence of lubrication. Regularly cleaning the tracks and rollers clearing obstructions and applying silicone spray can aid in resolving this issue.

Another reason why your sliding patio doors might be difficult to open or close is that the locking mechanism has gone out of date. This could be due to the alignment of the track or wear and tear but a simple fix is to adjust the locking mechanism by turning the adjustment screws that are located on the bottom of the track.

Drafts or air leaks around your sliding patio doors are a typical problem that can drastically reduce their energy efficiency. They typically originate from damaged weather stripping and poor door alignment that is easily fixed by replacing the old weather stripping and re-aligning the doors.

Loose Handle

If the handle of a sliding doors becomes loose, it can be quite frustrating and cause it difficult for people to open the door. This is typically caused by a misaligned locking mechanism, which can be corrected by loosening the screws that hold it in place and then tightening them until they fit against the jamb of the door.

A loose handle could result from the handle separating from the spindle that connects it to the interior or exterior handles. This is often the result of a number of factors, including frequent use, wear and tear or just aging. If the problem isn't resolved quickly, the handle can be loosened and fall off.

The best way to fix this issue is to start by finding the screws that connect the handles' exterior and interior. The screws are typically hidden behind plastic tabs that can be removed with a flathead (or a Phillips head screwdriver in certain cases) screwdriver. It's a good idea keep these screws safe so that you don't lose them.

After removing the old handles the next step will be to take off the spindle. This can be done by tapping the end with a mallet or hammer until it falls free from its position within the door. The new handle can be put in place by simply placing the spindle through the hole in the interior handle, and then inserting the other end of the spindle through the hole on the exterior handle. After the handle is installed, tighten it by screwing back the screws and then check to ensure that the lock and unlock mechanism works properly.

Weatherstripping that isn't working properly

A cracked or worn weatherstripping can allow water and air to get through your patio doors, which can compromise the comfort and energy efficiency of your home. It can allow moisture in and create drafts, which will increase your cooling and heating costs. It's simple to replace defective weatherstripping with no professional help. You can take off the old weatherstripping by loosing the staples with an screwdriver, or gently prying it with a putty knife and taking it off the door. Clean the area, and then apply a layer of weatherstripping which is secured with a foam seal. This will stop leaks and increase the comfort.

If your sliding patio door isn't functioning as it should, you have to address the issue immediately to avoid further damage and to keep them functioning for years to come. Depending on the severity of the issue, DIY or professional repair/replacement could be the best option.

Most problems with sliding patio screen door repair doors are caused by dirty rollers, faulty tracks, and a loose handle. These issues can usually be solved by regular maintenance and cleaning like applying lubrication and adjusting the track, and tightening the hardware. If these solutions do not work, you should seek out professional help to make sure that your patio is functioning just as it should. If you decide to replace or repair your patio door, be certain to verify its warranty information to make sure that it is covered by the manufacturer's guarantee. This can save you money on repairs or replacements in the near future.