Add a Sparkle to Your Fiat 500 Key Fob

These cute silicone covers will add a touch of fun to your Fiat 500 Key fob. The covers are easy to install and place them over the black cover.

The silicone covers protect your keys from splashes and dust. They also make your key appear more stylish. The signals produced by the remote control of your key are not hindered and work perfectly even when the cover is on.

Make sure your key is protected from splashes, dust, and other contaminants

This silicone cover will give a classy look to your key. It perfectly fits around the key fob, without slipping. It protects your key against dust and splashes. The cover's silicone material will not alter the signals transmitted by your key remote, which means you can continue to use the keys fob buttons like you normally do.

Accessorize your Fiat 500 with these funky covers in Grey and Black. They are perfect if your original key cover is starting to look shabby, damaged or scratched. The covers are made of premium silicone and come with two key rings so you can switch them out in case you get bored of one colour.

These covers replace the stock black key cover on your vehicle. These covers won't fit if you already have the original key cover.

Looks great

Fiat is a distinct and renowned Italian brand and their cars sport an incredible look that sets them apart from the crowd. These dazzling key covers are a fun and simple option to add a touch of luxury to your car keys without appearing too imposing. They look fantastic on your key fob, and can really refresh an old one.

They are designed to replace the black cover. They snap in place easily. It is best to take off the original cover prior to installing the new one.

The fiat 500 replacement Key logo can be seen in both Grey and black. So if you decide to change your decision, you're able to change it! These are also great gifts for Fiat 500 drivers.

Easy to install

Fiat 500 key covers can be a great option to upgrade your keys. They come in a range of colors and styles, so you'll be able to find the right one that matches your personality. Installing them yourself is in just ten minutes. You will need a screwdriver as well as some patience. The first step is taking off the cover that was originally installed. It must be removed before the new cover can be installed.

After removing the old cover You can then use a flathead for prying the four major attachment clips off the passenger side of fob assembly. They are marked in red on the picture below. Note the yellow locating tabs that need to be removed.

Replace the old battery with a #CR2032 coin cell battery. Make sure that the "+" positive side of the battery is pointing to the opening of the fob and that the"-" negative side is facing toward the buttons made of rubber.

Reattach the passenger-side mirror cover by aligning the locating tabs. After you've done this then put the fob on the driver's side back into your car and test it. Press the push button located at the top of the key. If everything is working properly, the parking lights should be activated and the doors will lock.

Easy to remove

Fiat 500 Key Covers are a delightful way to freshen up your key fob. They're easy to install and provide a unique appearance. They shield your key fob from smudges, scratches and dirt. For you to replace the cover, you'll first have to take off the old one from your vehicle.

You can accomplish this by pressing the "Fiat" red button on the front face of your key fob. Pressing the button releases the lever that allows you to pull out the key ignition switch made of metal (1). After removing the key, you'll see a small round silver metal switch with images of an unlocked and locked padlock next to it. This is the key fob battery switch. It is simple to change the battery by turning the switch a quarter turn using an inexpensive screwdriver that is flat.

The key fob contains a microchip inside that is used to communicate with the Body Control Module (BCM). When you insert the key in your Fiat car, it presses the ignition switch, Fiat 500 replacement key which acts as a "key-in-ignition" reminder. The BCM will then read the transponder that is on the key fob, to verify the validity of the key.

You can also add a sport design twin pack to your key covers to give it an unique and funky appearance. These covers snap on over the original cover and are available in Cream and silver. The key cover will only work when the original black cover is removed from your key fob.