Double Glazed Window Repair

Most double glazed windows come with a guarantee, and it's worth checking the scope of this warranty. It usually covers any problems with window hardware, like hinges and locking mechanisms within the first 10 years.

A break in the seal is typically the cause of mist between your glass windows. This should be repaired immediately to avoid damp or mould growing within your home.

Condensation Between the Windows

If condensation forms between windows in your home, it's an indication that the seal securing the gas that is used to insulate between the panes has failed. This is a serious problem that needs to be addressed immediately, especially during winter, when humidity levels are at their highest. It can also cause damage to the sills and sealant, or even mildew or mould.

Ideally double-glazed windows should not have condensation between the panes. This problem could be caused by excessive humidity or a particularly cold snap. This issue is usually resolved without having to replace the entire window. A professional can drill small holes in the glass and then spray the inside of the window with a specific cleaning solution. The moisture is then removed from the window. An anti-fogger is fitted to prevent future moisture buildup.

Condensation between the windows can also occur due to air leakage, or other factors outside the window. In this scenario it could take longer for the moisture inside the window to accumulate, since the air must be sufficiently warm to evaporate the water molecules. In these cases, it may be better to replace the double-glazed windows rather than trying to repair the seals on the existing units.

A double-glazed window is made up of two or three pieces of insulated glass held together by a metal frame. The gap in the middle of the windows is filled with a non-toxic gas for insulation like argon or Krypton and then sealed. The seal is responsible for stopping the gas that is insulating from escape and also preventing moisture and air from entering through the gap.

As windows age, the seals will deteriorate and can allow moisture to leak into the gap between the glass panes. It is important to recognise when the seals are leaking and this means that the double glazing is no longer functioning as well as it did in the past. This could result in an increase in efficiency in energy use, higher heating bills, property damage and the risk of condensation developing between the windows.

Mist

It is normal to see condensation appear on your windows. This indicates that your double glazing system is operating well and is able to keep heat in your house. The condensation occurs because the outside air is more warm than the glass and reaches its dew point before the window. This is one of the great advantages of having high quality double glazing.

If you see condensation on the inside of the window, this could indicate an issue with ventilation in your home. The moisture that is accumulating can't go anywhere else and ends up on the carpets, windows, furniture, and other areas of your home. It is possible to prevent this by having it checked out by an expert and ensuring that there is plenty of fresh air in the house.

Another reason for mist on double-glazed windows is because the seal between two glass panes is broken. This could be due to wear and tear, or by using chemical cleaning solutions. The best option is to get the windows fixed as soon as you can.

The professional repair of your windows will ensure that they are dry and free of condensation, fogging and misting. It is also less expensive than replacing the windows, and you'll save money on your energy bill.

A FENSA-registered window installer can give you a quote to repair or replace your double-glazed Windows. If your existing windows are quite old and have been used for a long time you might want to consider upgrading them to new A-rated energy efficient ones.

It is best to keep copies of any agreements and warranties with your window installers. This will be very helpful if any problems with the windows occur in the future, and you are able to then contact your fitters to resolve the issue. This is a better option than ignoring the issue which could cause more problems for your home.

The difficulty of opening or closing the door

It's not just a nuisance when double-glazed windows can be difficult to open or close. They can also result in more expensive energy bills due to the loss of heat and drafts. It can also pose a security risk, especially when the locks aren't working properly. It is recommended to fix double-glazed doors and windows as soon as you can.

If you have attempted to open your window using one of the easiest methods, such as using a screwdriver or tapping the frame using a solid object, the issue could be more serious. It could be that the window is sagging in its frame and needs to be re-set or it could be that there is a gap between the glass panes and frames. In either case, consult a double-glazing repair specialist to ensure the repairs are completed correctly and to prevent further problems.

It's not uncommon to find upvc window repair window handles and lock mechanisms to become difficult to operate or get stuck particularly when they're old and worn. This is due to a build up of dirt or grease within the handle. It can be solved by cleaning it using a upvc window repair cleaner. If this doesn't help, you can try tapping the upvc window repair near me frame using a hard object such as a screwdriver, taking care not to scratch the handle or the window handle mechanism.

If this does not resolve the issue, then the window may need to be replaced, as it is likely that the hinges are no properly aligned, or the locking mechanisms are damaged. In this situation, seek out a professional UPVC window repair expert.

David The Window Wizard specialises in all technical aspects of double glazed window and door repair upvc window including fixing a jammed or locked shut double glazing window. He has lots of experience in converting older window mechanisms to modern. This can save you money by replacing the entire window. For more information or to book an estimate, call or email us today.

Warping

Double glazed windows are often a great option for saving energy in your home. They are made up of two separate panes which have a spacer or dense gas between them. This creates a seal which keeps cold air out and warm air inside. In time, however windows can become damaged or broken and require repair. Luckily, most of these repairs are simple and can be done without the expense of replacing the entire window.

Warping is a frequent issue with double-glazed windows. This happens when windows start to bow, bend or twist, which can impact the strength of the window as well as its ability to insulate. Double glazed windows should be installed correctly and maintained regularly to avoid this problem.

If your double-glazed windows are starting to crack, it's essential to speak with a professional immediately to help prevent the situation from worsening. They will be able to inspect your windows to pinpoint the cause. They will use special tools to fix your issue and make sure that your windows are sealed properly.

Water vapour can trigger this problem, as it can build up between the windows over time. It can be caused by a number of different factors, such as the weather, humidity and temperature changes. To fix this problem the expert will drill a tiny hole to release moisture. Then, they will use a cleaning agent to clean the glass and then apply sealant to help keep it dry in the future.

Alternatively, if your windows aren't able to be opened or closed, this could be a sign of a problem with the mechanism or hinges. Before calling an expert to resolve the issue, it's recommended to lubricate the parts. This will usually resolve the issue and reduce the need for replacements. If your windows are worn out or don't offer the insulation you want, it may be better to replace them.